SJ/T 10112-1991 SD005A型高频接收机

作者:标准资料网 时间:2024-05-10 05:11:10   浏览:9045   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:SD005A型高频接收机
英文名称:High frequency receivers for Type SD005A
中标分类: 机械 >> 机械综合 >> 技术管理
发布部门:中华人民共和国机械电子工业部
发布日期:1991-04-02
实施日期:1991-07-01
首发日期:1900-01-01
作废日期:1900-01-01
起草单位:国营七一厂
起草人:罗以文、曾宪鹏、黄迈进
出版日期:1991-07-01
页数:19页
适用范围

本标准规定了SD005A型高频接收机的技术要求、试验方法、检验规则和标志、包装、运输、贮存等。本标准适用于SD005A型高频接收机。该产品为微机控制的接收机。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 机械 机械综合 技术管理
下载地址: 点击此处下载
基本信息
标准名称:园艺工具通用技术条件
英文名称:Garden tools—General requirements
中标分类: 机械 >> 工艺装备 >> 手工工具
ICS分类: 机械制造 >> 手持工具 >> 手动工具
替代情况:替代GB/T 6866-1986;GB/T 6867-1986
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2008-12-30
实施日期:2009-09-01
首发日期:1986-09-13
作废日期:
主管部门: 中国轻工业联合会
提出单位:中国轻工业联合会
归口单位:全国五金制品标准化技术委员会工具五金分技术委员会
起草单位:江苏金鹿集团有限公司、上海市工具工业研究所等
起草人:吴祖训、周兴华、蒋燕花、季胜华、林美德、陈立海、刘玉信、鞠家平、顾青
出版社:中国标准出版社
出版日期:2009-09-01
页数:12页
计划单号:20060999-T-607
适用范围

本标准规定了园艺工具的分类与命名、检验规则、包装、标志、运输与储存。
本标准适用于作业用园艺工具。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T230.1 金属洛氏硬度试验 第1部分:试验方法(A、B、C、D、E、F、G、H、K、N、T 标尺)
GB/T2828.1 计数抽样检验程序 第1部分:按接收质量限(AQL)检索的逐批检验抽样计划
GB/T5305 手工具包装、标志、运输与贮存

所属分类: 机械 工艺装备 手工工具 机械制造 手持工具 手动工具
Product Code:SAE J2014
Title:Pneumatic Tires for Military Tactical Wheeled Vehicles
Issuing Committee:Truck And Bus Tire Committee
Scope:This SAE Recommended Practice applies to all combinations of pneumatic tires for military tactical wheeled vehicles only as defined in SAE J2013. This applies to original equipment and new replacement tires and the retreading of these tires.This document describes tests and test methodology, which will be used to evaluate and measure tire and tire/vehicle related performance. The mission profile of the vehicle determines which of these tests are required and should be selected. Therefore, all of the tests included in this document are not required for each tire.The tire technical activity for the vehicle system has the responsibility for the selection of a specific test(s) to be used. The selected test(s) should be limited to that required to evaluate the tire or tire-vehicle characteristic which is related to the desired vehicle performance.Selected requirements of this specification shall be used as the basis for procurement of a tire for military tactical wheeled vehicles.